China-Metal Printing System

Commercial electron-beam 3D metal printing system unveiled in Xi'an City

  • English

Shotlist


Xi'an City, Shaanxi Province, northwest China - March 20, 2017
1. Various of China's first fused-filament electron-beam 3D metal printing system for commercial use, technicians preparing to print
2. Various of system printing, technician monitoring
3. Various of system, technicians
4. SOUNDBITE (Chinese) Guo Guangyao, head, Xi'an Zhirong Metal Printing System Co., Ltd. (ending with shot 5):
"The modeling process happens in a vacuum environment, so no pores will generate during productions of the metal parts, and compactness of the products can reach 100 percent. In this way, fatigue-resistance properties of the metal parts will be enhanced greatly. The system can be used to produce parts for large frames or beam structures, such as some storage tanks for satellites or fuel tanks for carrier rockets."
5. Various of Guo holding meeting with employees in front of screen, with printed metal part in hand
6. Guo talking with employees in front of computer screen
7. Various of screen showing digital control system

Storyline


China's first fused-filament electron-beam 3D metal printing system for commercial use was unveiled in Xi'an, capital city of northwestern Shaanxi Province last week.

The ZcompleX III system was self-developed by Xi'an Zhirong Metal Printing System Co., Ltd.

The system is able to create high-quality metal parts amid vacuum environments using active metals or refractory metals, with the utilization rate reaching nearly 100 percent.

"The modeling process happens in a vacuum environment, so no pores will generate during productions of the metal parts, and compactness of the products can reach 100 percent. In this way, fatigue-resistance properties of the metal parts will be enhanced greatly. The system can be used to produce parts for large frames or beam structures, such as some storage tanks for satellites or fuel tanks for carrier rockets," said Guo Guangyao, head of the Zhirong company.

The company has more than 20 core patents of the electron-beam 3D metal printing system, including its electron gun and digital control system.


DOWNLOAD
  • ID : 8046567
  • Dateline : March 20, 2017
  • Location : Xi'an,China
  • Category : science and technology
  • Duration : 1'00
  • Audio Language : Chinese/Nats
  • Source : China Central Television (CCTV)
  • Restrictions : No access Chinese mainland
  • Published : 2017-03-29 04:42
  • Last Modified : 2017-05-09 22:04:00
  • Version : 2

China-Metal Printing System

Commercial electron-beam 3D metal printing system unveiled in Xi'an City

Dateline : March 20, 2017

Location : Xi'an,China

Duration : 1'00

  • English


Xi'an City, Shaanxi Province, northwest China - March 20, 2017
1. Various of China's first fused-filament electron-beam 3D metal printing system for commercial use, technicians preparing to print
2. Various of system printing, technician monitoring
3. Various of system, technicians
4. SOUNDBITE (Chinese) Guo Guangyao, head, Xi'an Zhirong Metal Printing System Co., Ltd. (ending with shot 5):
"The modeling process happens in a vacuum environment, so no pores will generate during productions of the metal parts, and compactness of the products can reach 100 percent. In this way, fatigue-resistance properties of the metal parts will be enhanced greatly. The system can be used to produce parts for large frames or beam structures, such as some storage tanks for satellites or fuel tanks for carrier rockets."
5. Various of Guo holding meeting with employees in front of screen, with printed metal part in hand
6. Guo talking with employees in front of computer screen
7. Various of screen showing digital control system


China's first fused-filament electron-beam 3D metal printing system for commercial use was unveiled in Xi'an, capital city of northwestern Shaanxi Province last week.

The ZcompleX III system was self-developed by Xi'an Zhirong Metal Printing System Co., Ltd.

The system is able to create high-quality metal parts amid vacuum environments using active metals or refractory metals, with the utilization rate reaching nearly 100 percent.

"The modeling process happens in a vacuum environment, so no pores will generate during productions of the metal parts, and compactness of the products can reach 100 percent. In this way, fatigue-resistance properties of the metal parts will be enhanced greatly. The system can be used to produce parts for large frames or beam structures, such as some storage tanks for satellites or fuel tanks for carrier rockets," said Guo Guangyao, head of the Zhirong company.

The company has more than 20 core patents of the electron-beam 3D metal printing system, including its electron gun and digital control system.


ID : 8046567

Published : 2017-03-29 04:42

Last Modified : 2017-05-09 22:04:00

Source : China Central Television (CCTV)

Restrictions : No access Chinese mainland

More



Login
Username
Password
code
Sign In
OK